Zur Druckansicht wechseln Visit the English version of this page

www.jb-electronics.de » Elektronik » Nixie-Röhren » Nixie-Sammlung » IN-8 (ИН-8)

IN-8 (ИН-8)

Die IN-8 vom russischen Hersteller Sovtek hat eine Ziffernhöhe von 18mm und sieht der IN-14 relativ ähnlich; diese Nixie jedoch besetzt feste Anschlusspunkte in Form einer Fassung, die im folgenden Bild gut zu erkennen ist:

Die IN-8 im Größenvergleich

Die Ziffern sind denen der IN-14 nachempfunden; die 4 ist jedoch schmaler geraten und die 5 ist dieses Mal untypischerweise eine richtige 5. Diese Nixie besitzt auch keine Dezimalpunkte. Hier sind die einzelnen Ziffern zu sehen:

Die Ziffer 0Die Ziffer 1Die Ziffer 2Die Ziffer 3Die Ziffer 4

Die Ziffer 5Die Ziffer 6Die Ziffer 7Die Ziffer 8Die Ziffer 9

Wie auch bei der IN-2 sind Sockel nur schwer erhältlich. Das ist aber nicht allzu schlimm, da es die IN-8 auch in Form der IN-8-2 mit Anschlussdrähten gibt, und einige Beinchen der klassischen IN-8 oftmals verbogen sind oder schräg im Glassockel sitzen - so ist es zumindest bei meinen Exemplaren der Fall.

Hier die Anschlussbelegung der IN-8 und ihre sonstigen Daten:

Die Daten der IN-8

Nach oben

show print layout Die deutsche Version der Seite besuchen

www.jb-electronics.de » Electronics » Nixie Tubes » Nixie Tube Collection » IN-8 (ИН-8)

IN-8 (ИН-8)

The IN-8 from the Russian manufacturer Sovtek has a digit height of 18mm and looks quite similar to the IN-14 except for the solid socket instead of leads:

The IN-8 in size comparison

The digits are practivally the same as with the IN-14, except for the 4 that is a little more narrow and the real 5. There are no decimal points in this Nixie tube. Here you can see the glowing digits:

The digit 0The digit 1The digit 2The digit 3The digit 4

The digit 5The digit 6The digit 7The digit 8The digit 9

As with the IN-2, sockets are not too easy to obtain. This is not too bad as there is also the IN-8-2, an equivalent to the IN-8 with leads. Additionally, the base quality is quite poor with this specific IN-8, the pins are bent and not parallel, she wouldn't fit into a socket anyway.

Here you can see the pin connections and some other data of the IN-8:

Data for the IN-8

To the top